Wireless transmission of data, avoids complicated interference between the display and detection module, and the wiring is more convenient.
Using non-contact sensor detecting a current, without breaking the wire, safe, reliable, and convenient.
Voltage, current, power, temperature, capacity, percentage of remaining capacity, simultaneously show running time.
Two relay interfaces, to manage charge and discharge, respectively.
With charge over voltage, under discharge voltage, charge over-current, discharge over-current protections.
With power off memory function, the number of AH and WH before power off can be recorded.
Function introduction and setting:
(1)"NCP" charge overcurrent protections value, if the value is ＞0, the protections will be started, if =0, the protections function will not be activated.
(2)"OCP" discharge overcurrent protections value, if the value is ＞0, the protections will be started, if =0, the protections function will not be activated.
(3)“OVP” charge overvoltage protections value, if the value is ＞0, the protections will be started, if =0, the protections function will not be activated.
(4)"LVP" discharge undervoltage protections value,, if the value is ＞0, the protections will be started, if =0, the protections function will not be activated.
(5)"OUT" output control, the yellow cursor moves to this position, click the "OK" button, you can turn on the relay, or switch the working status of the two relays.
(6)"LCK" button lock control, move the cursor to this option, click the OK button to select this option.
(7)“BAT” battery total capacity setting item, move the cursor to this option.
(8)"BPC" battery remaining capacity setting, the remaining battery capacity can be estimated based on actual usage.
(9)“CER” current return function, if the actual current value is 0, and the instrument display value is not 0, move the cursor to this option and press OK briefly to clear the current.
(10)"RET" data reset function, if you want to return to 0 watt hour and run the accumulated time value, move the cursor to this option, short press OK to 0 these two parameters.
(11)"LNG" language switching function, the instrument parameters are preset with Chinese and English interfaces to choose from.
(12)"STI" power-on default output state setting options on the relay.
(13)"SFH" search device function, this feature can realize one-to-many communication.
(14)"DEL" relay delay action time setting option.
(15)"FCH" communication address setting function, this function can change the default communication address of the monitor and detection module.
(16)"SNR" sets the current value setting option for the screen to go out.
(17)"SNT" screen time setting option.
(18)"RFS" color reversal function.
Display: 2.4 inch TFT LCD display
Self-power measurement-range: 6V-80V
Measurement-range: 0-500V when external power supply
Input current measurement-range: 0-100A
External-supply voltage: 6-60V
Current: 0.1A-80A, 0.1A-100A, 0.1A-200A, 0.1A-300A, 0.1A-500A (optional)
Time: 0-100 hours
Power value: 999KW
Voltage: ± 1% + 2 words
Current: ± 2% + 5 words
Temperature: ± 1.5 ℃
Measurement rate: 5 times / second
Relay delay time: (0-60)S
Communication: open space transmission 10 meters
OVP (overvoltage- protections): 0.01V-500V
LVP (undervoltage-protections): 0.01-500V
OCP (charge overcurrent-protections): 0-500A
NCP (discharge overcurrent-protections): 0-500A
Display board size: 87 * 49 * 14mm / 3.43 * 1.93 * 0.55in
Measuring plate size: 114 * 54 * 28mm / 4.49 * 2.13 * 1.10in
Package size: 150 * 150 * 70mm / 5.91 * 5.91 * 2.76in
Package weight: 302g / 10.65ounce
1 * Volt-ammeter