RadioLink AT10Ⅱ 2.4GHz 12CH Remote Control Transmitter & R12DS 12CH Receiver & PRM-01 Voltage Telemetry Module for RC Drone


Free Shipping

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.
RadioLink AT10 II 2.4Ghz 12CH Remote Transmitter with R12DS Receiver and PRM-01 Voltage Return Module Battery RC drone Quadcopter

Multiple function remote control system, including helicopter,airplane and slider three type flying machine and five models, cover almost every popular model, you can fly any model by this radio.
3.5 inch colorful screen 320 * 480 resolution, clear display menu and graphs.
Great control distance: 1.1km on the ground, 2km in the sky.
Expansion feedback module, users can get plane details in real time.
Make very setting clear and exactly output result.
Fast response time only 3ms to the operation, faster than the other transmitter 20ms, even ten channels also let you feel it.
High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.
Strong anti-jumping, DSSS (Direct sequence spread spectrum) technology.
Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution, one and the only one anti-jumping DSSS technology. 
12CH receiver supports S-Bus and PWM.
PRM-01 Voltage Return Telemetry Module with high precision voltage detect.

Frequency: 2.4GHz ISM band (2400MHz~2485MHz);
Modulation mode: QSPK
Channel bandwidth: 5.0MHz
Spread spectrum: DSSS
Adjacent channel rejection: >38dBM
Transmitter power: <100mW (PCB testing);<20dBm (3 meter air testing)
Operating Voltage: 8.6~15V
Operating Current: <95mA
Control distance: 800 meters ground
Channel: 10 Channel, 8~10 channel are customizable
Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model
Simulator model: under the simulator

R12DS Specification:
Channels: 12 channels: output 12 channels signal, support S-BUS and PWM signal output synchronously.
Working voltage: 4.8-10V
Working current: 38-45mA (input voltage: 5V)
Size: 50 * 31.5 * 14.5mm
Weight: 14g
Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: about 4 kilometers air(Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations). 

PRM-01 Specification:
This telemetry sensor for EXT voltage,is applicable to AT10 and AT9.
Function: Feedback VOLT information and will vibration alarm when low voltage as the same function of BB.
Size: 4 * 2.7 * 1.3cm
Weight: 11g (including connector)

Package information:
Package size:  32.5 * 26 * 12cm / 12.8 * 10.2 * 4.7in
Package weight: 1048g / 2.3lb
General box package 

Package list:
1 * RadioLink AT10 II 12CH Transimitter (mode 2, left hand throttle)
1 * R12DS 10Ch Receiver
1 * PRM-01 Voltage Return Module
1 * Connector
1 * English Manual

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.