Dual Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl.
Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement.
Versatile digital tablet oscilloscope with built-in 4-1/2 digits multimeter which can shows the multimeter interface. The data logging function of multimeter can record data for a long time and export to CSV file.
Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc.) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(＋, －, ×, ÷, FFT，FFTrms,Intg,Diff,Sqrt, User Defined Function, Digital Filter).
Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis.
The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers.
Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop,etc.).
Built-in Wifi Module, uses can connect with TAO3102 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work.
Plug: EU/US/UK (optional)
Sampling Rate: 1GS/s
Vertical Resolution (A/D): 8 bits
Record Length: 40M
Waveform Refresh Rate: 45000 wfms/s
Horizontal Scale (s/div): 1ns/div – 1000s/div, step by 1 – 2 – 5
Display: 8in color LCD, 800 x 600 pixels display，multi-touch screen
Input Impedance: 1MΩ ± 2%, in parallel with 15pF ± 5pF
Max Input Voltage: 1MΩ ≤ 300Vrms
DC Gain Accuracy: ±3%
Probe Attenuation Factor: 0.001X – 1000X, step by 1 – 2 – 5
Input Coupling: DC, AC, GND
Vertical Sensitivity : 1mV/div – 10V/div (at input)
Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART(RS232), and CAN (optional)
Bus Decoding (optional): I2C, SPI, UART / RS232, CAN
Trigger Mode: Auto, Normal, and Single
Automatic Measurement: Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase A→B ↑, Phase A→B↓, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
Waveform Math: ＋, －, ×, ÷, FFT，FFTrms,Intg,Diff,Sqrt, User Defined Function, Digital Filter
Waveform Storage: 100 waveforms
Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional)
Frequency Counter: Available
1.Display: 4-1/2 digits
3.Voltage: mV (20.000mV–200mV); DCV (2.0000V–1000.0V); ACV (2.0000V–750V)
4.Current: DCA (20.00A); ACA (20.00A)
6.Diode Test: Yes
Battery: 7.4V, 8000mAh， 5 hours operation
Dimension ( W x H x D): 270 x 191 x 48 mm
Device Weight: About 1.7kg
1 * TAO3102 Digital Storage Oscilloscope
1 * Power Cord
1 * Adapter
1 * Micro USB Cable
1 * BNC-SAM
1 * Multimeter Lead
2 * Probe
1 * Current Ext. Module
1 * Probe Adjust
1 * Stand Holder
1 * CD ROM
1 * Quick Guide
1 * Carry Bag