This is a new sopt-welding technology, and support intelligent switch or manual switch working modes to satisfied with different demands.
Equipped with OLED display, you can see the data clearly.
With screen overturn function, easy to set the screen display direction according to your demands.
Widely applications, suitable for welding cylindrical lithium batteries, NI-MH battery, nickel cadmium battery and etc..
10-14V output voltage, support powered by 12 V 400-800CCA car battery, 3S 5000mAh 60C lithium battery.
Integrated-handle design, conform to human engineering, easy operation, can provide accurate welding.
Perfect for welding 0.1-0.3mm nickel plated sheet.
The two electrodes and solder-pins should not be touched together to avoids short circuits.
Pay attention to the correct wiring, refer to the manual for the specific wiring method.
When using for the first time, set the welding pulse duration to 2ms and check the welding result. According to the actual welding situation, set the appropriate welding pulse duration step by step to obtain perfect welding effect.
Name: Spot-Welding Machine
Input voltage: 10-14V
Welding thickness: 0.1-0.3mm
Trigger delay: 0.5-5s
Screen flip: 180°
Pulse time: 1-100ms (default), 1-500ms (setting)
Short pulse: 0-100%
Working mode: automatic/manual
Voltage warning: low voltage, high voltage
Power-supply interface: XT90
Recommended battery: lithium battery (3S 5000mAh minimum 60C) car battery (12V 400-800CCA) (not included)
Item size: 110 * 93 * 45mm / 4.33 * 3.66 * 1.77in
Package size: 200 * 200 * 100mm / 7.87 * 7.87 * 3.94in
Package weight: 750g / 1.65lb
1 * Spot-Welding Machine
1 * Soldering Pen
1 * Nickel-belt
2 * Solder Pins
2 * Battery Holder